Issue:
Relay R1 and R2 programming on an ATS22
Product Line:
Altistart 22
Environment:
All
Cause:
Relay 1 or 2 needs a new assignment.
Resolution:
First, open access to the IO menu by going to the ConF menu, set LAC = ON.
Then go to the IO menu and set r1 or r2 to the appropriate configuration.
Relay R1 and R2 programming on an ATS22
Product Line:
Altistart 22
Environment:
All
Cause:
Relay 1 or 2 needs a new assignment.
Resolution:
First, open access to the IO menu by going to the ConF menu, set LAC = ON.
Then go to the IO menu and set r1 or r2 to the appropriate configuration.
Released for:Schneider Electric Australia
Did this answer your question?
Issue:
Relay R1 and R2 programming on an ATS22
Product Line:
Altistart 22
Environment:
All
Cause:
Relay 1 or 2 needs a new assignment.
Resolution:
First, open access to the IO menu by going to the ConF menu, set LAC = ON.
Then go to the IO menu and set r1 or r2 to the appropriate configuration.
Relay R1 and R2 programming on an ATS22
Product Line:
Altistart 22
Environment:
All
Cause:
Relay 1 or 2 needs a new assignment.
Resolution:
First, open access to the IO menu by going to the ConF menu, set LAC = ON.
Then go to the IO menu and set r1 or r2 to the appropriate configuration.
Released for:Schneider Electric Australia
Did this answer your question?
