How to configure AFDD ( Arc fault Detection Device) in Ecostruxure power design-Ecodial? | Schneider Electric Australia

{}

0 item count of documents is

My Products Item count in basket is 0 My Documents Item count in basket is 0

Support

Search FAQs

FAQ000219336

How can we help you today?

How to configure AFDD ( Arc fault Detection Device) in Ecostruxure power design-Ecodial?

In Ecodial, Below are the steps to configure AFDD.
Step-1

Create the network
Ensure that the AFD is getting used in 50HZ & Single phase network and up to 25A (NL) & 40A (FR) only for final loads

Step-2

Select the Circuit breaker in the Feeder
Enable the AFD

Step-3

Run the calculation for the automatic selection of the AFD

Step 4

For manual selection of AFD, Click on it
Select AFD selection tab for more options

Step 5

Check the specification and validate as per requirement

Step 6

Run the calculation

Step 7

The Feeder is successfully incorporated with AFDD.

Released for:Schneider Electric Australia

Published on:09/08/2021Last Modified on:29/09/2021