Use the following method with the VMWare configured in NAT mode:
1. Configure SoMachine the communication via "active path":
2.In the Communication Settings window , add a gateway and use the IP address of the physique PC.
3.Select the new gateway and Scan it
4. Now you can connect to the M251
1. Configure SoMachine the communication via "active path":
2.In the Communication Settings window , add a gateway and use the IP address of the physique PC.
3.Select the new gateway and Scan it
4. Now you can connect to the M251
Gepubliceerd voor:Schneider Electric Belgium
