What is the detection range of the heat-tag SMT10020, and the Panel Server PAS400 ?

1. One single HeatTag cannot cover an entire switchboard made up of several cubicles even without partitioning. I propose to check the installation possibilities given in the HeatTag instruction sheet at point 3 on the link below. You will also see there where to position the sensor for optimal coverage.

https://download.schneider-electric.com/files?p_Doc_Ref=MFR5173801&p_enDocType=Instruction+sheet&p_File_Name=MFR5173801-02.pdf

2. For the maximum distance for good wireless communication of PAS gateway, the document from the link below is applicable: To avoid wireless communication disturbances, the gateway and the wireless devices must be mounted with a maximum distance of 3 meters between them.

https://download.schneider-electric.com/files?p_Doc_Ref=DOCA0194EN&p_enDocType=User+guide&p_File_Name=DOCA0194EN-00.pdf

We recommend that all the wireless devices should be within the same switchboard for effective communication, please refer to the rule 1 of the generic design rules.

You can refer Rule #5 suggest to avoid wireless communication disturbances, the gateway and the wireless devices must be mounted without metallic partition between them.

Gepubliceerd voor:Schneider Electric Belgium