Issue:
How to convert the 2601 drum switches from maintained to momentary.
Product Line:
NEMA Contactors and Starters
Environment:
2601 Drum Switches
Cause:
Product Operation
Resolution:
The cam design of this drum switch makes it possible to convert from maintained contact to momentary contact (spring return-to-off) without removing the cover. NOTE: This modification cannot be performed on AG2S2 and BG1S4 devices. To make this change, remove the handle screw and handle, turn the shaft 180°, then replace the handle and handle screw. Ensure that the handle screw is properly torqued.
How to convert the 2601 drum switches from maintained to momentary.
Product Line:
NEMA Contactors and Starters
Environment:
2601 Drum Switches
Cause:
Product Operation
Resolution:
The cam design of this drum switch makes it possible to convert from maintained contact to momentary contact (spring return-to-off) without removing the cover. NOTE: This modification cannot be performed on AG2S2 and BG1S4 devices. To make this change, remove the handle screw and handle, turn the shaft 180°, then replace the handle and handle screw. Ensure that the handle screw is properly torqued.
Released for:Schneider Electric Canada
Issue:
How to convert the 2601 drum switches from maintained to momentary.
Product Line:
NEMA Contactors and Starters
Environment:
2601 Drum Switches
Cause:
Product Operation
Resolution:
The cam design of this drum switch makes it possible to convert from maintained contact to momentary contact (spring return-to-off) without removing the cover. NOTE: This modification cannot be performed on AG2S2 and BG1S4 devices. To make this change, remove the handle screw and handle, turn the shaft 180°, then replace the handle and handle screw. Ensure that the handle screw is properly torqued.
How to convert the 2601 drum switches from maintained to momentary.
Product Line:
NEMA Contactors and Starters
Environment:
2601 Drum Switches
Cause:
Product Operation
Resolution:
The cam design of this drum switch makes it possible to convert from maintained contact to momentary contact (spring return-to-off) without removing the cover. NOTE: This modification cannot be performed on AG2S2 and BG1S4 devices. To make this change, remove the handle screw and handle, turn the shaft 180°, then replace the handle and handle screw. Ensure that the handle screw is properly torqued.
Released for:Schneider Electric Canada
