Issue:
Display configuration on ATS22
Product Line:
Altistart 22, ATS22
Environment:
All models
Cause:
Display only shows RUN
Resolution:
With Run, ACC or DEC on the display, push the Enter button (ENT). You should see LCr1. Push Enter again to see the current for Phase A. Escape back to LCr1 and scroll down to see Phases B (LCr2) and phase C (LCr3).
Total current on all three phases is not available. You can only see the individual current values for each phase.
Display configuration on ATS22
Product Line:
Altistart 22, ATS22
Environment:
All models
Cause:
Display only shows RUN
Resolution:
With Run, ACC or DEC on the display, push the Enter button (ENT). You should see LCr1. Push Enter again to see the current for Phase A. Escape back to LCr1 and scroll down to see Phases B (LCr2) and phase C (LCr3).
Total current on all three phases is not available. You can only see the individual current values for each phase.
Udgivet til:Schneider Electric Danmark
