Søg i ofte stillede spørgsmål
How is the Start/Stop circuit wired for the ATS48 soft starter?
Issue:
Where do you wire the start run circuit for the ATS48 soft starter?
Product Line:
Altistart 48 ATS48
Environment:
All
Cause:
NA
Resolution:
For 2-wire control , jumper the RUN and STOP terminals and wire a run contact between the 24V and RUN terminals.
![2 wire control 2 wire control](https://ckm-content.se.com/ckmContent/servlet/servlet.ImageServer?id=0151H000008zqRkQAI&oid=00DA0000000abSm)
For 3-wire control, wire a N/C stop contact between 24V and STOP and wire a N/O start contact between 24V and RUN.
Where do you wire the start run circuit for the ATS48 soft starter?
Product Line:
Altistart 48 ATS48
Environment:
All
Cause:
NA
Resolution:
For 2-wire control , jumper the RUN and STOP terminals and wire a run contact between the 24V and RUN terminals.
For 3-wire control, wire a N/C stop contact between 24V and STOP and wire a N/O start contact between 24V and RUN.
Udgivet til:Schneider Electric Danmark
Se mere
Område:
![](https://d3enhkr3t0164a.cloudfront.net/assets/images/product_placeholder.jpeg)
Se mere
Område:
![](https://d3enhkr3t0164a.cloudfront.net/assets/images/product_placeholder.jpeg)