Does EOTE V3.1support communication with M241 PLC via Somachine Network IP address

Hvordan kan vi hjælpe dig i dag?

1. Issue

One customer asks if EOTE V3.1 supports communication with M241 PLC via SoMachine Network IP address. He finds it works via SoMachine Network NodeName but it does not work via IP address.

2. Environment

EOTE V3.1

3. Resolution

The reply from EOTE R&D is this is not EOTE's issue. It is M241's limitation. For M251, the symptoms can be resolved by updating the firmware on the PLC side.

4. FAQ Applicable Conditions

It also applies to VXD and EOTE V3.1 SP1.