• Under the Configuration -SPx70 Controller in RemoteConnect select the object tab.
• To add the Hour, Minutes and Seconds in the RemoteConnect Object.
• In Object  Configuration, click add object and enter the following information below when monitoring the HOUR.

• Assigning modbus register for the HOUR by selecting the modbus tab.

• click add object and enter the following information below when monitoring the MINUTE.

• Assigning modbus register for MINUTE by selecting the modbus tab.

• click add object and enter the following information below when monitoring the SECOND.

• Assigning modbus register for SECOND by selecting the modbus tab.

• Hit Apply button then Write the program into the SCADAPackx70 to make changes.
• Monitor the modbus registers assigned. In this example monitor register 40100 for HOUR, 40101 for MINUTE and 40102 for SECOND.

Udgivet til:Schneider Electric Danmark