After installation, launch RemoteConnect, and a DTM problem happened.


if RemoteConnect's DTMs are not installed correctly. See information below for missing catalogues.


Solution:

• To update the catalogue, try clicking the update catalogue button.
• The installation file for RemoteConnect must be located on the local drive C:.
• Make sure that the installation 2-RemoteConnect-R-2.7.3_Ecostruxure-Control-Expert-V-15.1.zip file is unblocked.

• Verify under the C:\Program Files (x86)\Common Files that the FDT and Schneider Electric Shared are complete.

Udgivet til:Schneider Electric Danmark