How can you start and stop the ATS480 softstart from the keypad (VW3A1113 or VW3A1111)?

Hvordan kan vi hjælpe dig i dag?

Customer wants to use the Run and Stop buttons on the keypad to start and stop the motor.

To enable this function go to Menu 3: Complete Settings, and then Menu 3.8: Command channel.

Then select the Cmd channel 1 (or Cmd channel 2 if using the Command Switching function) and set it to HMI.
480 HMI

The soft start will still require 24VDC to be present on the Stop input in order to be able to run.

Udgivet til:Schneider Electric Danmark

Udgivet den:19.5.2023Senest ændret den:19.5.2023

Område:

Altivar Soft Starter ATS480

Område:

Altivar Soft Starter ATS480