This FAQ has been written for NEAL (North East Africa and Levant) region. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
How to change the units of measure on the display of an ACSC100 unit.
Product line:
ACSC100.
Environment:
All Serial Numbers.
Cause:
Install, Configuration.
Resolution:
You may change the units of measure from Metric to US/Imperial.
At the display press the <ESC> key until you get to the main menu (On/Standby). Press the <DOWN> key until you get to Set Display Unit. Press <ENTER> and now you can choose from Metric or US.
How to change the units of measure on the display of an ACSC100 unit.
Product line:
ACSC100.
Environment:
All Serial Numbers.
Cause:
Install, Configuration.
Resolution:
You may change the units of measure from Metric to US/Imperial.
At the display press the <ESC> key until you get to the main menu (On/Standby). Press the <DOWN> key until you get to Set Display Unit. Press <ENTER> and now you can choose from Metric or US.
Released for:Schneider Electric Egypt and North East Africa
