Issue:
Looking for a way to initialize PLC variables with values from the HMI.
Product Line:
Vijeo Designer (all versions)
Resolution:
To set an initial value for your PLC tag, you could define an On Startup action from your HMI to set the values.
The action should use the Word-set Operation as shown in the screen shot below.
Looking for a way to initialize PLC variables with values from the HMI.
Product Line:
Vijeo Designer (all versions)
Resolution:
To set an initial value for your PLC tag, you could define an On Startup action from your HMI to set the values.
The action should use the Word-set Operation as shown in the screen shot below.
Released for:Schneider Electric Indonesia
