Issue:
How do you set up a command switch via logic input on the ATV630 and ATV930 drives?
Product Line:
Altivar Process ATV630 and ATV930 drives
Environment:
All
Cause:
Need to use a logic input to switch between two command functions like HMI start stop and terminal start stop.
Resolution:
Programming
Press the Home button.
Scroll down to menu 5 complete settings enter.
Scroll down to menu 5.5 command and references enter
Scroll down and choose command switching and assign it to DI3 enter
Scroll down and choose CMD channel 1 for your first command and CMD 2 for your second command.
How do you set up a command switch via logic input on the ATV630 and ATV930 drives?
Product Line:
Altivar Process ATV630 and ATV930 drives
Environment:
All
Cause:
Need to use a logic input to switch between two command functions like HMI start stop and terminal start stop.
Resolution:
Programming
Press the Home button.
Scroll down to menu 5 complete settings enter.
Scroll down to menu 5.5 command and references enter
Scroll down and choose command switching and assign it to DI3 enter
Scroll down and choose CMD channel 1 for your first command and CMD 2 for your second command.
Diterbitkan untuk: Schneider Electric Indonesia
Issue:
How do you set up a command switch via logic input on the ATV630 and ATV930 drives?
Product Line:
Altivar Process ATV630 and ATV930 drives
Environment:
All
Cause:
Need to use a logic input to switch between two command functions like HMI start stop and terminal start stop.
Resolution:
Programming
Press the Home button.
Scroll down to menu 5 complete settings enter.
Scroll down to menu 5.5 command and references enter
Scroll down and choose command switching and assign it to DI3 enter
Scroll down and choose CMD channel 1 for your first command and CMD 2 for your second command.
How do you set up a command switch via logic input on the ATV630 and ATV930 drives?
Product Line:
Altivar Process ATV630 and ATV930 drives
Environment:
All
Cause:
Need to use a logic input to switch between two command functions like HMI start stop and terminal start stop.
Resolution:
Programming
Press the Home button.
Scroll down to menu 5 complete settings enter.
Scroll down to menu 5.5 command and references enter
Scroll down and choose command switching and assign it to DI3 enter
Scroll down and choose CMD channel 1 for your first command and CMD 2 for your second command.
Diterbitkan untuk: Schneider Electric Indonesia
Perlu bantuan?
Mulai di sini!
Temukan jawaban sekarang. Cari solusi sendiri, atau hubungi salah satu pakar kami.
Hubungi Dukungan
Hubungi tim layanan pelanggan kami untuk mendapatkan informasi lebih lanjut, bantuan teknis, penanganan keluhan, dan lainnya.
Tempat pembelian
Temukan distributor Schneider Electric terdekat di lokasi Anda dengan mudah.
Jelajahi FAQ
Dapatkan jawaban yang Anda butuhkan dengan menelusuri Pertanyaan yang Sering Diajukan (FAQ) berdasarkan topik.
Hubungi Bagian Penjualan
Silakan kirimkan pertanyaan terkait penjualan secara online dan pakar kami akan menghubungi Anda.
