How to resetting accumulated energy using the display in iEM3100/iEM3200/iEM3300 series energy meters.

The following resets are available, depending on your meter model:
Partial energy
Input metering

Below is the procedure how to resetting accumulated energy using the display;
1. Navigate to the Partial Active E or Partial Reactive E screen. The screen displays the date of the last reset.
2. Press and hold . The Reset screen appears.
3. Press to confirm the reset and enter the meter password when prompted.
NOTE: Regardless of the screen you use to access this reset, accumulations of both Partial Active Energy and the Partial Reactive Energy (if available) are cleared.

Released for:Schneider Electric India