Probable cause:
Easy-UPS has detected a charger error.
Possible Solution:
1. Verify if there is any short circuit at the Easy-UPS
battery terminal.
2. Do manual restart of UPS by switching off the output, turning off the input power supply, and turning On the input and output, this should resolve the issue.
In case the error persists even after trying the above troubleshooting, log the complaint.
Easy-UPS has detected a charger error.
Possible Solution:
1. Verify if there is any short circuit at the Easy-UPS
battery terminal.
2. Do manual restart of UPS by switching off the output, turning off the input power supply, and turning On the input and output, this should resolve the issue.
In case the error persists even after trying the above troubleshooting, log the complaint.
Released for:Schneider Electric India
