To program jog function, go into CONF, FULL, JOG-.
JOG: assign to value desired for pulse operation.
JGF: Jog frequency referenced with range 0-10hz.
JGT: Jog delay with range 0-2.0s.
게시 대상:슈나이더 일렉트릭 Korea
{}
To program jog function, go into CONF, FULL, JOG-.
JOG: assign to value desired for pulse operation.
JGF: Jog frequency referenced with range 0-10hz.
JGT: Jog delay with range 0-2.0s.