What functions can be assigned to the analog output on an Altivar 320 Drive?

Issue:
Program an ATV320 drive to send feedback for a specific function

Product Line:
Altivar 320

Environment:
Altivar Drives

Cause:
N/A

Resolution:

Go under CONF, FULL, I/O, AO1.

In this parameter you can assign a function to the analog output. The list of functions can be seen in the following table.



This table can be found in the programming manual. https://www.se.com/mx/es/download/document/NVE41295/

Опубликовано для:Schneider Electric Казахстан