EasyLogic PM2000 series energy and power meters provide all the measurement capabilities required to monitor an electrical installation in a single 96x96 mm unit. Two variants are available with LED and LCD display options. Characteristics:

Active energy Class 0.5S as per IEC 62053-22, Active energy Class 1.0 as per IEC 62053-21
Reactive energy Class 1.0 as per IEC 62053-24 standard
Tested in accordance with IEC 62052-11 standard for 5 A, I-nominal and 1 A, I-nominal (field settable)
Active load timers monitor meter operation and Run hours, advising maintenance requirements
Field configurable password for securing setup information to prevent tampering of integrated values
Cyber security option to disable RS-485 port through front panel keys, protecting against unauthorized access, which is helpful during installation and trouble shooting of communication network
LED display: Auto scaling, 9+3 digits for energy, 4 digits for other parameters
LCD display: 6 digits with auto scaling for energy and other parameters 12 A.M. snap shot summary page stored in the meter for 24 hours
2 configurable rate counters display values in customer specified units based on energy measured
Energy preset feature for retrofit application
Optional I/O modules available: 2 Digital Inputs& 2 Outputs or 2 Analogue Inputs
& 2 Outputs for comprehensive WAGES monitoring
Mounts using two clips, no tools required
Compact size with maximum of 54 mm depth
Connectable up to 480 V ac L-L +/- 10% without voltage transformers for category III, double insulated installations
Test LED on front panel for test and calibration on site or in laboratory
Heart-beat LED indicates normal functioning and communication status if connected to RS-485 network

Need help?

Start here!

Contact Support