Issue:
Customer has an Ethernet IP control network and a device that will communicate Modbus RTU only. They want to use the Tesys T as a protocol bridge to control the Modbus RTU device.
Product Line:
Tesys T LTMR product.
Environment:
All Ethernet modes, All serial numbers.
Cause:
No information on this configuration available in current literature.
Resolution:
It is not recommended. Portions of this configuration may work but some portions may not. This has not been tested for compatibility or reliability and cannot be recommended. A dedicated Protocol Bridge should be used in this situation.
Customer has an Ethernet IP control network and a device that will communicate Modbus RTU only. They want to use the Tesys T as a protocol bridge to control the Modbus RTU device.
Product Line:
Tesys T LTMR product.
Environment:
All Ethernet modes, All serial numbers.
Cause:
No information on this configuration available in current literature.
Resolution:
It is not recommended. Portions of this configuration may work but some portions may not. This has not been tested for compatibility or reliability and cannot be recommended. A dedicated Protocol Bridge should be used in this situation.
Released for:Schneider Electric Malaysia
