Yes, you can wire multiple 3-wire 750WPR sensors in parallel as they are a 3-wire device and aren't load dependant.
Some of the key features are:
- 10A maximum load current
- Stand-by power consumption is less than 1W
- 3 Wire
- Neutral required
- 30 seconds warmup time
- 18 metre radius x 110° rated detection field at maximum sensitivity
- 5 seconds to 20 minutes timer delay range
- Cables accommodates 4 terminals, up to 2 x 2.5mm² cable per terminal
- Relay switching method
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=750WPR
Released for:Schneider Electric New Zealand
Yes, you can wire multiple 3-wire 750WPR sensors in parallel as they are a 3-wire device and aren't load dependant.
Some of the key features are:
- 10A maximum load current
- Stand-by power consumption is less than 1W
- 3 Wire
- Neutral required
- 30 seconds warmup time
- 18 metre radius x 110° rated detection field at maximum sensitivity
- 5 seconds to 20 minutes timer delay range
- Cables accommodates 4 terminals, up to 2 x 2.5mm² cable per terminal
- Relay switching method
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=750WPR
Released for:Schneider Electric New Zealand
