Specification Requirements
For us to identify the correct Push Button, we will be needing the following information:
-Push button diameter: (30mm, 22mm, 16mm or 8mm)
-Metal or plastic: (Metal is applicable only for 22mm and 30mm)
-Color:
-Mounting Type: (Flush, Projecting or Recessed)
-Contact composition: (1NO, 1NC, 1NO+1NC, etc.)
-Type of operator: (Push-push or Spring return)
-For LED operated, provide the operating voltage:
-Marking if any:
Once we have these information, you may proceed to the respective product selector per country:
Singapore: https://www.se.com/sg/en/product-category/4800-push-buttons-switches-pilot-lights-and-joysticks/?filter=business-1-industrial-automation-and-control
Malaysia: https://www.se.com/my/en/product-category/4800-pushbuttons-switches-pilot-lights-and-joysticks/?filter=business-1-industrial-automation-and-control
Philippines: https://www.se.com/ph/en/product-category/4800-push-buttons-switches-pilot-lights-and-joysticks/?filter=business-1-industrial-automation-and-control
How to use Product Selector:
Assume that we are going to configure the following specification:
-Push button diameter: 22mm
-Metal or plastic: Metal
-Color: Green
-Mounting Type: Flush
-Contact composition: 1NO+1NC
-Type of operator: Spring Return
-For LED operated, provide the operating voltage: N/A
-Marking if any: Unmarked
1. First, we need to identify the push button diameter on the side filter in order to select the correct product:
2) Select if you want Metal or Plastic, once you have your preference, click on the "Launch Product Selector" of your selected product (Since for our simulation, we put Metal, we are going to choose XB4):
3) Once the Product Selector has been launch, select the Push Button:
4) Input all the information that we've gathered earlier:
Note: If the product is not found on the product selector or you're having issues with the tool, please contact your country's customer care center to seek Technical Support
For us to identify the correct Push Button, we will be needing the following information:
-Push button diameter: (30mm, 22mm, 16mm or 8mm)
-Metal or plastic: (Metal is applicable only for 22mm and 30mm)
-Color:
-Mounting Type: (Flush, Projecting or Recessed)
-Contact composition: (1NO, 1NC, 1NO+1NC, etc.)
-Type of operator: (Push-push or Spring return)
-For LED operated, provide the operating voltage:
-Marking if any:
Once we have these information, you may proceed to the respective product selector per country:
Singapore: https://www.se.com/sg/en/product-category/4800-push-buttons-switches-pilot-lights-and-joysticks/?filter=business-1-industrial-automation-and-control
Malaysia: https://www.se.com/my/en/product-category/4800-pushbuttons-switches-pilot-lights-and-joysticks/?filter=business-1-industrial-automation-and-control
Philippines: https://www.se.com/ph/en/product-category/4800-push-buttons-switches-pilot-lights-and-joysticks/?filter=business-1-industrial-automation-and-control
How to use Product Selector:
Assume that we are going to configure the following specification:
-Push button diameter: 22mm
-Metal or plastic: Metal
-Color: Green
-Mounting Type: Flush
-Contact composition: 1NO+1NC
-Type of operator: Spring Return
-For LED operated, provide the operating voltage: N/A
-Marking if any: Unmarked
1. First, we need to identify the push button diameter on the side filter in order to select the correct product:
2) Select if you want Metal or Plastic, once you have your preference, click on the "Launch Product Selector" of your selected product (Since for our simulation, we put Metal, we are going to choose XB4):
3) Once the Product Selector has been launch, select the Push Button:
4) Input all the information that we've gathered earlier:
Note: If the product is not found on the product selector or you're having issues with the tool, please contact your country's customer care center to seek Technical Support
Released for:Schneider Electric Philippines
