Issue:
Fault reset in ATS48
Product line:
ATS48, Altistart 48
Environment:
All
Cause:
Softstart is faulted
Resolution:
Remove the control power (CL1-CL2 voltage) from the unit until the display goes off. Wait a few seconds and re-apply the control power. This resets the fault. If the unit powers up to a fault code, it has faulted again. Investigate the cause of the fault.
Fault reset in ATS48
Product line:
ATS48, Altistart 48
Environment:
All
Cause:
Softstart is faulted
Resolution:
Remove the control power (CL1-CL2 voltage) from the unit until the display goes off. Wait a few seconds and re-apply the control power. This resets the fault. If the unit powers up to a fault code, it has faulted again. Investigate the cause of the fault.
Released for:Schneider Electric Singapore
Issue:
Fault reset in ATS48
Product line:
ATS48, Altistart 48
Environment:
All
Cause:
Softstart is faulted
Resolution:
Remove the control power (CL1-CL2 voltage) from the unit until the display goes off. Wait a few seconds and re-apply the control power. This resets the fault. If the unit powers up to a fault code, it has faulted again. Investigate the cause of the fault.
Fault reset in ATS48
Product line:
ATS48, Altistart 48
Environment:
All
Cause:
Softstart is faulted
Resolution:
Remove the control power (CL1-CL2 voltage) from the unit until the display goes off. Wait a few seconds and re-apply the control power. This resets the fault. If the unit powers up to a fault code, it has faulted again. Investigate the cause of the fault.
Released for:Schneider Electric Singapore
