Issue:
Program an ATV320 drive to send feedback for a specific function
Product Line:
Altivar 320
Environment:
Altivar Drives
Cause:
N/A
Resolution:
Go under CONF, FULL, I/O, AO1.
In this parameter you can assign a function to the analog output. The list of functions can be seen in the following table.
This table can be found in the programming manual. https://www.se.com/mx/es/download/document/NVE41295/
Program an ATV320 drive to send feedback for a specific function
Product Line:
Altivar 320
Environment:
Altivar Drives
Cause:
N/A
Resolution:
Go under CONF, FULL, I/O, AO1.
In this parameter you can assign a function to the analog output. The list of functions can be seen in the following table.
This table can be found in the programming manual. https://www.se.com/mx/es/download/document/NVE41295/
Released for:Schneider Electric Singapore
