Specification Requirements
For us to identify the correct Miniature Circuit Breaker (MCB), we will be needing the following information:
1. No of poles:
2. Curve Code (B, C, or D):
(Note: If you do not know how to select the curve code, you may go to this FAQ: https://www.se.com/au/en/faqs/FA290880/)
3. Ampere Rating:
4. Breaking Capacity:
5. Operating Voltage:
Once we have these information, you may proceed to the respective product selector per country:
SG: https://www.se.com/sg/en/product-range/7556-acti-9-ic60
MY: https://www.se.com/my/en/product-range/7556-acti-9-ic60
PH: https://www.se.com/ph/en/product-range/7556-acti9-ic60
How to use Product Selector:
1. Click on the Product Selector on the webpage:
2) Input all the information that we've gathered earlier, for example, we are looking for the following specification:
1. No of poles: 3 Poles
2. Curve Code (B, C, or D): C Curve
3. Ampere Rating: 13A
4. Breaking Capacity: 6kA
5. Operating Voltage: 380-415Vac
How to choose product using Filter on Acti 9 page:
If there's a problem with the configurator, you may resort to the 2nd method which is to configure on the page's filters as shown below:
Note: If the product is not found on the product selector or you're having issues with the tool, please contact your country's customer care center to seek Technical Support
For us to identify the correct Miniature Circuit Breaker (MCB), we will be needing the following information:
1. No of poles:
2. Curve Code (B, C, or D):
(Note: If you do not know how to select the curve code, you may go to this FAQ: https://www.se.com/au/en/faqs/FA290880/)
3. Ampere Rating:
4. Breaking Capacity:
5. Operating Voltage:
Once we have these information, you may proceed to the respective product selector per country:
SG: https://www.se.com/sg/en/product-range/7556-acti-9-ic60
MY: https://www.se.com/my/en/product-range/7556-acti-9-ic60
PH: https://www.se.com/ph/en/product-range/7556-acti9-ic60
How to use Product Selector:
1. Click on the Product Selector on the webpage:
2) Input all the information that we've gathered earlier, for example, we are looking for the following specification:
1. No of poles: 3 Poles
2. Curve Code (B, C, or D): C Curve
3. Ampere Rating: 13A
4. Breaking Capacity: 6kA
5. Operating Voltage: 380-415Vac
How to choose product using Filter on Acti 9 page:
If there's a problem with the configurator, you may resort to the 2nd method which is to configure on the page's filters as shown below:
Note: If the product is not found on the product selector or you're having issues with the tool, please contact your country's customer care center to seek Technical Support
Released for:Schneider Electric Singapore
