How can the ATV212 or ATV21 be set up for start/stop on terminal and ramp to 60 Hz?

Search FAQs

Issue:
ATV212 or ATV21 set up to start/stop on terminal and ramp to 60 Hz

Product Line:
ATV21, ATV212

Environment:
All models and serial numbers.

Cause:
None

Resolution:
Begin by wiring the remote start switch or relay for two wire control between terminals P24 and F.

Program the nameplate motor parameters into the following parameters:

CODE - DESCRIPTION

thr - Motor thermal prot.

uLu - Motor rated voltage

F415 - Motor rated current

F417 - Motor rated speed

Make the following parameter settings:

CODE - DESCRIPTION	SETTING
LL - Low limit frequency	as desired
UL - Upper limit freq	60
Dec - Deceleration ramp time	as desired
ACC - Acceleration ramp time	as desired
CMOD - Command mode selection	0

“If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:

Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us at drive.products.support@se.com to create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)“