Search FAQs
How to scaling the analog input signal on ATV310 and ATV303
This function establishes an interface between the analog input signal and drive internal value.
1. Go to menu ConF and press ENT
2. Rotate jog dial to FULL, then press ENT
3. Rotate jog dial to 200- I/O MENU, then press ENT
4. Rotate jog dial to 204- , then press ENT
5. 204.0 AI1 type, change 204.0 to 0A. 0A is Current: x-y mA. Range determined by the AI1 current scaling parameter of 0% 204.1 and AI1 current scaling parameter of 100% 204.2 settings below.
6. 204.1 AI1 current scaling parameter of 0% * (0-20mA)
7. 204.2 AI1 current scaling parameter of 100% * (0-20mA)
*Visible only if AI1 type 204.0 is set to 0A.
1. Go to menu ConF and press ENT
2. Rotate jog dial to FULL, then press ENT
3. Rotate jog dial to 200- I/O MENU, then press ENT
4. Rotate jog dial to 204- , then press ENT
5. 204.0 AI1 type, change 204.0 to 0A. 0A is Current: x-y mA. Range determined by the AI1 current scaling parameter of 0% 204.1 and AI1 current scaling parameter of 100% 204.2 settings below.
6. 204.1 AI1 current scaling parameter of 0% * (0-20mA)
7. 204.2 AI1 current scaling parameter of 100% * (0-20mA)
*Visible only if AI1 type 204.0 is set to 0A.
Released for:Schneider Electric Thailand
Related products for Schneider Electric Thailand
Range:
Related products for Schneider Electric Thailand
Range: