Issue:
ATV312 drive stuck in local mode showing the three scrolling LEDs.
Product Line:
Altivar ATV312
Environment:
All
Cause:
After putting the ATV312 drive in local mode its appears to be stuck and it will not go back to remote mode.
Resolution:
First check the serial number and firmware. All new drives built in 2016 or later or drives which have firmware 5.1 IE56 or greater can no longer go back and forth between Local and Remote modes. For these newer drives, you will have to reset the drive to a factory default state to return it back to remote mode.
Older drives allowed mode change via the Mode button on the face of the drive.
ATV312 drive stuck in local mode showing the three scrolling LEDs.
Product Line:
Altivar ATV312
Environment:
All
Cause:
After putting the ATV312 drive in local mode its appears to be stuck and it will not go back to remote mode.
Resolution:
First check the serial number and firmware. All new drives built in 2016 or later or drives which have firmware 5.1 IE56 or greater can no longer go back and forth between Local and Remote modes. For these newer drives, you will have to reset the drive to a factory default state to return it back to remote mode.
Older drives allowed mode change via the Mode button on the face of the drive.
Опубліковано для:Schneider Electric Україна
Issue:
ATV312 drive stuck in local mode showing the three scrolling LEDs.
Product Line:
Altivar ATV312
Environment:
All
Cause:
After putting the ATV312 drive in local mode its appears to be stuck and it will not go back to remote mode.
Resolution:
First check the serial number and firmware. All new drives built in 2016 or later or drives which have firmware 5.1 IE56 or greater can no longer go back and forth between Local and Remote modes. For these newer drives, you will have to reset the drive to a factory default state to return it back to remote mode.
Older drives allowed mode change via the Mode button on the face of the drive.
ATV312 drive stuck in local mode showing the three scrolling LEDs.
Product Line:
Altivar ATV312
Environment:
All
Cause:
After putting the ATV312 drive in local mode its appears to be stuck and it will not go back to remote mode.
Resolution:
First check the serial number and firmware. All new drives built in 2016 or later or drives which have firmware 5.1 IE56 or greater can no longer go back and forth between Local and Remote modes. For these newer drives, you will have to reset the drive to a factory default state to return it back to remote mode.
Older drives allowed mode change via the Mode button on the face of the drive.
Опубліковано для:Schneider Electric Україна
