Issue:
ATS48 programmable relay for run status
Product Line:
ATS48 Altistart 48
Environment:
All
Cause:
Need contact closure with run command
Resolution:
Yes, R3 is a programmable relay, and its factory default is [rnl] 'motor powered' to indicate run status.
The ATS48 also has 2 logic outputs that can be programmed to indicate the motor is running or several other functions.
ATS48 programmable relay for run status
Product Line:
ATS48 Altistart 48
Environment:
All
Cause:
Need contact closure with run command
Resolution:
Yes, R3 is a programmable relay, and its factory default is [rnl] 'motor powered' to indicate run status.
The ATS48 also has 2 logic outputs that can be programmed to indicate the motor is running or several other functions.
Опубліковано для:Schneider Electric Україна
