Issue:
How to change name and location of an ACRD200 cooling unit.
Product line:
InRow ACRD200.
Environment:
All Serial Numbers.
Cause:
Install, Configuration.
Resolution:
Press ESC until you get to the main screen (On/Standby)
Use the Up or Down arrows to find the heading Set Identification
Press ENTER and select Name
Now you will be prompted for a password
Use the default password of “apc”
If this does not work check with your Admin for the correct password
If password has been lost use the last eight digits of the serial number
Press Enter on Name and select any name with 8 characters or less
Press Enter on Location and select any location with 8 characters or less
How to change name and location of an ACRD200 cooling unit.
Product line:
InRow ACRD200.
Environment:
All Serial Numbers.
Cause:
Install, Configuration.
Resolution:
Press ESC until you get to the main screen (On/Standby)
Use the Up or Down arrows to find the heading Set Identification
Press ENTER and select Name
Now you will be prompted for a password
Use the default password of “apc”
If this does not work check with your Admin for the correct password
If password has been lost use the last eight digits of the serial number
Press Enter on Name and select any name with 8 characters or less
Press Enter on Location and select any location with 8 characters or less
Released for:Schneider Electric UK
Issue:
How to change name and location of an ACRD200 cooling unit.
Product line:
InRow ACRD200.
Environment:
All Serial Numbers.
Cause:
Install, Configuration.
Resolution:
Press ESC until you get to the main screen (On/Standby)
Use the Up or Down arrows to find the heading Set Identification
Press ENTER and select Name
Now you will be prompted for a password
Use the default password of “apc”
If this does not work check with your Admin for the correct password
If password has been lost use the last eight digits of the serial number
Press Enter on Name and select any name with 8 characters or less
Press Enter on Location and select any location with 8 characters or less
How to change name and location of an ACRD200 cooling unit.
Product line:
InRow ACRD200.
Environment:
All Serial Numbers.
Cause:
Install, Configuration.
Resolution:
Press ESC until you get to the main screen (On/Standby)
Use the Up or Down arrows to find the heading Set Identification
Press ENTER and select Name
Now you will be prompted for a password
Use the default password of “apc”
If this does not work check with your Admin for the correct password
If password has been lost use the last eight digits of the serial number
Press Enter on Name and select any name with 8 characters or less
Press Enter on Location and select any location with 8 characters or less
Released for:Schneider Electric UK
