Issue:
Difference between ring tongue and spring terminals on a LC1D12G7
Product Line:
IEC Contactors and Starters
Environment:
Tesys D contactors
Resolution:
Spring terminals accept wire that goes into a hole on the contactor and is then held in place by an internal spring clip. Ring tongue terminals accept wire that has a ring tongue connector. You back out the terminal screw, slide in the ring terminal and tighten the screw.
Difference between ring tongue and spring terminals on a LC1D12G7
Product Line:
IEC Contactors and Starters
Environment:
Tesys D contactors
Resolution:
Spring terminals accept wire that goes into a hole on the contactor and is then held in place by an internal spring clip. Ring tongue terminals accept wire that has a ring tongue connector. You back out the terminal screw, slide in the ring terminal and tighten the screw.
Released for:Schneider Electric USA
Issue:
Difference between ring tongue and spring terminals on a LC1D12G7
Product Line:
IEC Contactors and Starters
Environment:
Tesys D contactors
Resolution:
Spring terminals accept wire that goes into a hole on the contactor and is then held in place by an internal spring clip. Ring tongue terminals accept wire that has a ring tongue connector. You back out the terminal screw, slide in the ring terminal and tighten the screw.
Difference between ring tongue and spring terminals on a LC1D12G7
Product Line:
IEC Contactors and Starters
Environment:
Tesys D contactors
Resolution:
Spring terminals accept wire that goes into a hole on the contactor and is then held in place by an internal spring clip. Ring tongue terminals accept wire that has a ring tongue connector. You back out the terminal screw, slide in the ring terminal and tighten the screw.
Released for:Schneider Electric USA
