How to Select TeSys IEC Contactors & Overload Relay Part Numbers

Issue:
Product selection of a Schneider Electric TeSys IEC Non-Reversing & Reversing Contactors and Overload Relays for a new installation, assistance is available using the online TeSys IEC configuration tool.

Product Line:
Contactors & Overload Relays: TeSys D, TeSys F and TeSys  K

Environment:
Contactors and Starters IEC

Cause:
Selecting the correct product for a new installation involves many factors, such as Continuous current Rating,  Motor Voltage,  Maximum Horse power Ratings, Maximum Current  Utilization Category ( Resistive vs. Inductive)  Number of phases & poles, and overload ( current range & phase sensitivity)

Resolution:
Consider the following options when selecting new items for installation:

(1) Our Online Digest. Please refer to Chapter 18 which provides selection assistance for our TeSys  IEC contactors and starters and the associated accessories:
http://www.digestplus-us.schneider-electric.com/

(2) Use the online Calculators and Visual Product Configurators at the following link :
www.se.com/us/sites/us/en/support/product-support-resources/software-and-calculators/calculators-and-online-tools/calculators-and-online-tools.page

(3) Further assistance is available from a local authorized Schneider Electric Distributor, using our Distributor Locator at the below link:
www.se.com/us/sites/us/en/support/distributor-locator/power-industry-locator.page

All the above tools may be found by visiting our US Home Page.
www.se.com/site/home/index.cfm/us/

Released for:Schneider Electric USA