Issue:
Type of material coating the busbars on I-line II busway?
Product Line:
I-line and I-Line II Busway
Environment:
Products sold in North America
Resolution:
Bus bars for I-Line and I-Line II busway are plated to ensure low surface-to-surface contact resistance and to minimize surface corrosion.
Aluminum bus bars are electroplated with a coat of tin after preparation with the ALSTAN 80 process.
Copper bus bars are plated with a layer of silver that is flashed onto the surface of the bus bars.
Refer to page 15 of the 5600CT9101 2018 catalog. The link is provided below:
https://www.se.com/us/en/download/document/5600CT9101/
Type of material coating the busbars on I-line II busway?
Product Line:
I-line and I-Line II Busway
Environment:
Products sold in North America
Resolution:
Bus bars for I-Line and I-Line II busway are plated to ensure low surface-to-surface contact resistance and to minimize surface corrosion.
Aluminum bus bars are electroplated with a coat of tin after preparation with the ALSTAN 80 process.
Copper bus bars are plated with a layer of silver that is flashed onto the surface of the bus bars.
Refer to page 15 of the 5600CT9101 2018 catalog. The link is provided below:
https://www.se.com/us/en/download/document/5600CT9101/
Released for:Schneider Electric USA
Issue:
Type of material coating the busbars on I-line II busway?
Product Line:
I-line and I-Line II Busway
Environment:
Products sold in North America
Resolution:
Bus bars for I-Line and I-Line II busway are plated to ensure low surface-to-surface contact resistance and to minimize surface corrosion.
Aluminum bus bars are electroplated with a coat of tin after preparation with the ALSTAN 80 process.
Copper bus bars are plated with a layer of silver that is flashed onto the surface of the bus bars.
Refer to page 15 of the 5600CT9101 2018 catalog. The link is provided below:
https://www.se.com/us/en/download/document/5600CT9101/
Type of material coating the busbars on I-line II busway?
Product Line:
I-line and I-Line II Busway
Environment:
Products sold in North America
Resolution:
Bus bars for I-Line and I-Line II busway are plated to ensure low surface-to-surface contact resistance and to minimize surface corrosion.
Aluminum bus bars are electroplated with a coat of tin after preparation with the ALSTAN 80 process.
Copper bus bars are plated with a layer of silver that is flashed onto the surface of the bus bars.
Refer to page 15 of the 5600CT9101 2018 catalog. The link is provided below:
https://www.se.com/us/en/download/document/5600CT9101/
Released for:Schneider Electric USA
