You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue
Cannot not remotely trip or close the breaker by using the VIP410
Product Line
VIP410
Environment
Closing or tripping a breaker remotely or through external input.
Cause
Circuit Breaker Control is not on or the external wiring is not setup.
Resolution
There are two ways to remotely trip the VIP410 and Mitop Trip Unit
1. Using communications for tripping through VIP410.
2. External input trip, but usually this is for another protection device such as 'Buchholz' for example.
Please see in extract of doc after.
Cannot not remotely trip or close the breaker by using the VIP410
Product Line
VIP410
Environment
Closing or tripping a breaker remotely or through external input.
Cause
Circuit Breaker Control is not on or the external wiring is not setup.
Resolution
There are two ways to remotely trip the VIP410 and Mitop Trip Unit
1. Using communications for tripping through VIP410.
2. External input trip, but usually this is for another protection device such as 'Buchholz' for example.
Please see in extract of doc after.
Released for:Schneider Electric Vietnam
