You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Using "+/- Speed Around a Reference" on the ATV61 or ATV71 drive.
Product Line:
ATV61, ATV71
Environment:
All models and serial numbers
Cause:
NA
Resolution:
+/- Speed Around a Reference is a way to adjust the motor speed above or below a given Speed reference. One application for Speed Around Reference is to run a secondary conveyor belt above or below the speed of a primary conveyor belt with a single speed reference going to both drives. It may be a case where two conveyor belts are feeding a single conveyor. The single conveyor may need to run at a slightly higher speed to keep product moving. See the ATV61 or ATV71 programming manual for details.
Using "+/- Speed Around a Reference" on the ATV61 or ATV71 drive.
Product Line:
ATV61, ATV71
Environment:
All models and serial numbers
Cause:
NA
Resolution:
+/- Speed Around a Reference is a way to adjust the motor speed above or below a given Speed reference. One application for Speed Around Reference is to run a secondary conveyor belt above or below the speed of a primary conveyor belt with a single speed reference going to both drives. It may be a case where two conveyor belts are feeding a single conveyor. The single conveyor may need to run at a slightly higher speed to keep product moving. See the ATV61 or ATV71 programming manual for details.
Released for:Schneider Electric Vietnam
