You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
TCT parameter on the Altivar process drive
Product Line:
Altivar Process
Environment:
All models, All serial numbers
Cause:
Documentation
Resoultion:
Complete Settings-> Command and Reference-> 2-wire type
From the main menu, Navigate to "Complete Settings" then "Command and Reference". From here, you can scroll down to 2/3 wire control, and if it is set to 2 wire, 2-wire control type can be found just below.
TCT parameter on the Altivar process drive
Product Line:
Altivar Process
Environment:
All models, All serial numbers
Cause:
Documentation
Resoultion:
Complete Settings-> Command and Reference-> 2-wire type
From the main menu, Navigate to "Complete Settings" then "Command and Reference". From here, you can scroll down to 2/3 wire control, and if it is set to 2 wire, 2-wire control type can be found just below.
Released for:Schneider Electric Vietnam
