You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
PME@local host is not detected when Detect Event Sources is selected in the ENM Configuration
after ENM 8.3.x is installed, it should be showing as the screen shot below
Product Line:
Event Notification Module (ENM) 8.3
Power Monitoring Expert (PME) 8.x
Environment:
Windows Server
Cause:
Unable to configure ENM since is not detecting PME@localhost.
Resolution:
Need to make sure ENM is licensed before trying to configure ENM.
Verify that ENM is activated and listed under Floating License Manager.
For instruction on how to license ENM, see the licensing guide under the FAQ article: FA225923.
PME@local host is not detected when Detect Event Sources is selected in the ENM Configuration
after ENM 8.3.x is installed, it should be showing as the screen shot below
Product Line:
Event Notification Module (ENM) 8.3
Power Monitoring Expert (PME) 8.x
Environment:
Windows Server
Cause:
Unable to configure ENM since is not detecting PME@localhost.
Resolution:
Need to make sure ENM is licensed before trying to configure ENM.
Verify that ENM is activated and listed under Floating License Manager.
For instruction on how to license ENM, see the licensing guide under the FAQ article: FA225923.
Released for:Schneider Electric Vietnam
