You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Are the drive contacts rated for 120Vac?
Product Line:
ATV630 , ATV930
Environment:
Altivar
Resolution:
Yes, the drives relay contact R1 is rated for AC and DC voltage.
R1A NO contact of relay R1
R1B NC contact of relay R1
R1C Common point contact of relay R1
Output Relay 1
Minimum switching capacity: 5 mA for 24 Vdc
Maximum switching current on resistive load:
3 A for 250 Vac (OVC II) and 30 Vdc
Maximum switching current on inductive load:
2 A for 250 Vac (OVC II) and 30 Vdc. Inductive load must be
equipped with a voltage surge suppression device according to ac or
dc operation with total energy dissipation greater than the inductive
energy stored in the load. Refer to sections Output Relay with
Inductive AC Loads and Output Relay with Inductive DC Loads
Refresh time: 1 ms ± 0.25 ms
Service life: 100,000 operations at maximum switching current
Are the drive contacts rated for 120Vac?
Product Line:
ATV630 , ATV930
Environment:
Altivar
Resolution:
Yes, the drives relay contact R1 is rated for AC and DC voltage.
R1A NO contact of relay R1
R1B NC contact of relay R1
R1C Common point contact of relay R1
Output Relay 1
Minimum switching capacity: 5 mA for 24 Vdc
Maximum switching current on resistive load:
3 A for 250 Vac (OVC II) and 30 Vdc
Maximum switching current on inductive load:
2 A for 250 Vac (OVC II) and 30 Vdc. Inductive load must be
equipped with a voltage surge suppression device according to ac or
dc operation with total energy dissipation greater than the inductive
energy stored in the load. Refer to sections Output Relay with
Inductive AC Loads and Output Relay with Inductive DC Loads
Refresh time: 1 ms ± 0.25 ms
Service life: 100,000 operations at maximum switching current